Benefits Apply direct to metal
Rust Inhibitive
Fast Dry/Cure
Water clean-up
Smooth low sheen finish
Finish: Low Sheen
Gloss: 5-10°/60°
Vehicle Type: 100% Acrylic
Recommended Coverage Rate: Approx. 350 sq. ft. per gal.
Dry Time To Touch: 2 hours
To Recoat: 8 hours
Weight Per Gallon: 10.2 lbs.
Viscosity: 95-100 KU (±2 KU)
Solids Content By Weight: 49%(±1)
By Volume: 36% (±1)
Suggested Uses Direct-to-metal on: Structural steel, tanks, and equipment. Chemical and marine environments, oil refineries, paper mills, power plants, and direct-to-galvanized.
