Bennette Paint | Bennette Paint

Product Data Sheets
To view or download Product Data & MSDS in Adobe Acrobat Reader for any Bennette product, see our Product Index.

Interior Primers

Use the correct primer!

Excellent

Good

Fair

Not Recommended

Click Product Number for more information.

Substrates

Wood, unpainted

Plywood

Paneling

Cured "Wet" Plaster

Drywall (new, unpainted)

Drywall (for gloss paints)

Drywall (under wallpaper)

Joint Compound¹

Stains (Smoke, Water)

Glass (clean)

Ceramic Tile^{3, 4}

Mildly chalky surfaces

Galvanized Metal^{4, 5}

Ferrous Metal^{4, 5}

PVC Pipe^{4, 6}

Notes

¹Enamel holdout may not be suitable for topcoating with gloss enamels unless sanded before applying topcoat.

²Allow mortar, masonry and concrete to cure 60 - 90 days prior to priming.

³Extremely hard and glossy surfaces should be sanded or deglossed prior to application of primer. Test such surfaces for adhesion when using latex primers.

⁴Topcoat acrylic primers with Acrylic 17 acrylic enamel.

⁵Grease and oil must be removed before priming. Additional surface preparation may be required. See Bennette Product Data Sheet prior to application.

⁶Using Bennette 330085/86 Acrylic Epoxy direct to unprimed PVC will provide superior results. Surface should be sanded and wiped with Acetone prior to priming.

⁷Some vinyl wallcoverings may lose adhesion to substrate when topcoated. Check test area for adhesion and bleed-through prior to priming.

- back to top -